PYD Life Mini - SWITCH TEMP. UNIT; PLACEMENT & STORAGE; PLACEMENT; STORAGE

Mini Craft Express Heat PressMini Craft Express Heat Press
9 10
www.pydlife.com
www.pydlife.com
SWITCH TEMP. UNIT
1. Turn off the machine;
2. Long press the time and the temp. buttons together for 3 seconds to switch between
℃ and ℉ .
PLACEMENT & STORAGE
PLACEMENT
After printing, the machine will remain at a high temperature. Please
put it back on the safety base and do not touch its bottom.
A. Mini Craft Express Heat Press
B. Safety Base
STORAGE
1. Turn off and unplug the machine,
wait until it cools down completely;
2. Put it into the original box, and store
it in a dry and cool place.
Be careful! Avoid direct touch on heat platen!