Pyle Pro PYD-1910 User Manual

14 – Pyle Pro Mixer Owner’s Manual
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing with the product
• Include in your letter your return address, daytime phone number and R.A. number
• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty will
be considered void if the unit was tampered with, improperly serviced or
subject to misuse, neglect or accidental damage.
Limited Warranty
PYLE PRO MIXERS
warranty registration card
Thank you for purchasing this PYLE
product. To activate your
warranty, please mail this card
within 10 days.
Name
Address
City, State ZIP
Model No. Serial #
(if available)
Date of Purchase
Purchased at:
Music Products Store
Catalog Merchandiser
Sound Contractor/Installer Mail Order
Other
Please complete warranty card, detach and return
Specifications
PYD1910/1920/1930/1940/1950
Input Sensitivity/Impedance
Mic 1-2
Phono 1-2
Line 1-6
Output Level
Amp
Zone
Record
Frequency Response
S/N Ratio (at 1 kHz)
Mic
Phono
Line
Distortion
Mic
Phono
Line
Equalizer
Control Frequencies
Boost/Cut Range
MIC Tone Control
Treble
Mid
Bass
Talkover Attenuation
Echo Delay Time
(PYD-1920/1940)
Sampling Length
(PYD-1950)
Power Source
Dimensions, inches
(mm)
30, 60, 120, 250, 500
1K, 2K, 4K, 8K, and 16KHz
+/- 10 dB from center
10kHz; +10/-30dB
1 kHz; +10/-30dB
100Hz; +10/-30dB
-16dB
50mS-120mS
12 Seconds
120 VAC, 60Hz/230 VAC, 50 Hz
19.0 x 4.13 x 9.45
(482 x 105 x 240)
1.5 mV/600 Ohms, bal/unbal
3.0 mV/50K Ohms
150.0 mV/27K Ohms
2.0 V/10-kOhms
2.0 V/10-kOhms
150mV/10-kOhms
20Hz – 20kHz +/- 3 dB
>60 dB/1.5mV input
>70 dB/3.0mV input
>80 dB/150.0 mV input
0.20%
0.05%
0.03%
All PYLE PRO products are carefully constructed and tested before shipment.
Units purchased in the USA are warranted to be free of defects in material
and workmanship for two (2) years from the date of purchase. This warranty
is limited to the original retail purchaser of the mixer.
Should the unit fail due to factory defects in material or workmanship, your
unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline
at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must
appear on the outside of your package and on all paperwork relating to your
return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
pro series
PYD-1910/PYD1920
PYD-1930/PYD-1940
PYD-1950
4 channel
professional
www.pyleaudio.com

Pyle Pro PYD-1910 Specifications

General

Channels	4
Microphone Inputs	2
USB Playback	Yes
EQ Controls	3-band
Inputs	RCA
Outputs	RCA

Summary

Product Specifications

Product Limited Warranty

Input and Output Features Overview

PYD-1910 Mixer Controls

Detailed breakdown of the PYD-1910 mixer's buttons, knobs, and jacks for operation.

PYD-1920 Mixer Controls

PYD-1930 Mixer Controls

PYD-1940 Mixer Controls

PYD-1950 Mixer Controls

Presetting Mixer Controls

Connecting Mixer Inputs

Guides on connecting audio sources and microphones to the mixer before use.

Connecting Microphones

Instructions for connecting microphones via XLR or 1/4" jacks.

Connecting High Level Audio Sources

How to connect sources like CD players or VCRs to Line inputs.

Connecting Turntables and Level Outputs

Steps for connecting turntables and setting input selectors.

Connecting Mixer Outputs

Output to Amplifier

Connect mixer output to amplifier or receiver for speaker playback.

Output to Tape or Digital Recorder

Connect mixer output to recorder for audio capture.

Zone Output Connections

Connect mixer output to secondary amplifier for remote speakers.

Headphone Monitoring

Using headphones for private listening and audio cueing.

Connecting the Mixer Lamp

Instructions for connecting an optional 12V/3W gooseneck lamp.

Using Mixer Controls

Turning On the Mixer

Step-by-step guide to powering on the mixer and connected equipment.

Monitoring ('Cueing') Inputs

How to monitor selected input sources using headphones before mixing.

Mixing Audio Inputs

Process of combining multiple audio input sources for playback.

Adding Equalization

Using EQ controls to tailor sound and match acoustic surroundings.

Adding External Effects

Connecting and integrating external audio effects processors.

Using Microphones

Incorporating voice into the mix and using talkover mode.

Microphone Tone Controls

Adjusting bass, mid, and treble for microphone inputs.

Microphone Level Controls

Controlling the input levels for MIC1 and MIC2.

MIC Frequency Kill Switches

Functionality of switches to eliminate specific frequency ranges.

Advanced Mixer Functions

Mono/Stereo Mode Switch

Switching between mono and stereo output configurations.

Crossfader and Assign Switches

Using the crossfader to blend between assigned input channels.

Echo Controls (PYD-1920/1940)

Adjusting delay, repeat, and level for the built-in echo effect.

Sound Effects (PYD-1930/1940)

Using pre-programmed sound effects and adjusting speed/volume.

Digital Sampler (PYD-1950)

Recording, playback, and pitch adjustment for digital samples.

Troubleshooting and Maintenance

Troubleshooting Common Issues

Solutions for common problems like no power or signal, hum, and feedback.

Care and Maintenance Guidelines

Recommendations for keeping the mixer in good condition.