Pyle view PLCM38FRV User Manual

User Manual
Model : PLCM38FRV
Universal Mount Optional Front
View & Rear View Backup Color CMD
Camera Built-In Distance Scale Line
Specifications
The above parameters can be modified without separate notification
Images sensors:
MT9V011
Power upply:
DC12V
Lens Angle(Deg.):
170
TV System:
PAL/NTSC
Video Output:
1.0vp-p,75ohm
S/N Ratio:
48dB
IP rating:
IP67
Operating
-30 ~ +70 RH95%MAX.
White Balance: Auto
Minimum illumination:
0.5Lux
AGC:
Auto
Electronic shutter
1/60(NTSC) 1/50(PAL)
Effective pixels:
640*480
Resolution(TV Lines):
420
1/10,000second
Temperature(Deg.C):

Pyle view PLCM38FRV Specifications

General

Brand	Pyle view
Model	PLCM38FRV
Category	Dash Cameras
Language	English

Summary

Specifications

Image Sensor

Specifies the image sensor model used in the camera.

Power Supply

Indicates the voltage requirement for camera operation.

Lens Angle

Defines the field of view of the camera lens in degrees.

TV System

Lists the supported video signal standards (e.g., PAL/NTSC).

Video Output

Details the video output signal characteristics.

S/N Ratio

Specifies the signal-to-noise ratio for image clarity.

IP Rating

Indicates the camera's protection against dust and water.

Operating Temperature

Defines the range of ambient temperatures for operation.

Minimum Illumination

Specifies the lowest light level required for a clear image.

Effective Pixels

States the camera's resolution in pixels.

Installation and Wiring

Wire Connection

Details the steps and connections required for the camera's wiring.

Installation Methods

Describes different ways to physically mount the camera.