Need help?Do you have a question about the Pyle Hydra PLMR440PA and is the answer not in the manual?
General| Power Output | 4 x 40W |
|---|---|
| Bluetooth | Yes |
| Channels | 4 |
| Impedance | 4-8 Ohms |
| Frequency Response | 20Hz - 20kHz |
| T.H.D. | <1% |
| Input Sensitivity | 200mV |
| Power Supply | 12V DC |
| Type | Marine Amplifier |
| Weight | 3.5 lbs |
| Color | Black |
| Inputs | RCA, AUX |
| Control Features | Volume, Bass, Treble, Balance |
| Material | Aluminum |
Package contents include marine amplifier, custom microphone, mounting bracket, input/output cables, remote controller, and mounting screws.
Explains how to correctly use the input level control to avoid distortion and protection circuit engagement.
Details the power and speaker connections for the amplifier in 4-channel mode.
Details the power and speaker connections for the amplifier in bridged mode.
Explains Tri-Mode operation connecting main speakers and a subwoofer, including component values for crossover.
Guides on checking connections, fuses, and power status when the amplifier fails to turn on.
Addresses common audio noise problems like hiss, engine noise, and squeal from speakers.
Explains troubleshooting steps when the amplifier's protection LED is illuminated.
Provides checks for causes of amplifier overheating, such as impedance, shorts, and airflow.
Offers solutions for distorted audio output, focusing on level settings and crossovers.
To Next Page