Pyle PBMSPG3BK User Manual

www.PyleUSA.com
3
Wireless BT Streaming:
1. Turn the power button to “ON”. The LED light turns blue and blinks quickly, then
enter Wireless BT mode and you will hear a “Bluetooth Device Ready To Pair” tone.
2. Activate Wireless BT of your mobile phone and search for the device name
“PyleUSA” then connect it. The blue LED light blinks slowly and will make a tone
“Bluetooth Device Connected Successfully” once connected.
3. Play the music from your mobile phone and enjoy.
4. Press Forward or Backward button on the device or on Mobile phones to select
songs you like.
5. Press Play/Pause button on the device or on Mobile phones to play/pause the
music.
6. Press and hold Forward or Backward button to adjust volume up and down or
adjust the mobile phones’ volume.
Playing music from USB disk & Micro SD card:
1. Turn the Power button to “ON”.
2. Insert Micro SD card or USB ash disk into slot, the speaker will make a tone
“Music Play Mode”, and play the stored music automatically.
3. Under playing mode, short press Forward or Backward button to select songs
you like, press and hold to adjust the volume up and down.
4. Press Play/Pause to play or pause.
Remark: Under Wireless BT playing mode, insert Micro SD or USB will disconnect
the Bluetooth and switch to play the USB or Micro SD card. You can press the
MODE button to switch to Wireless BT mode again.
FM Radio:
1. Under FM radio state, the audio cable provided is the antenna. Please insert the
audio cable to get the best FM signal before using.
2. Turn the power button to “ON”, press the “MODE” button, the speaker will
prompt “The Radio Mode” when entering FM state.
3. Under playing mode, short press “Play/Pause” button to auto search the FM
Channel and store it automatically.
4. Press Forward or Backward button to change the stored FM channel.

Pyle PBMSPG3BK Specifications

General

Brand	Pyle
Model	PBMSPG3BK
Category	Speakers
Language	English