The supporting shelf installation method
1. Turn ON your amplifier or mixing board and set the volume control to minimum position. To connect the
phantom power to the microphone turning on the phantom switch, accommodate the volume control from low to
high so obtained effect to your moderate level for protected the sauna from pounding.
2. If the head of the microphone is covered by hand or brought close to the speaker, a howling sound may be
generated. To prevent this, first decrease the volume, then place the microphone so that it is not pointed to the
speaker and there is a sufficient distance between the microphone and speaker.
3. The sensitivity of cartridge is very fine, Don’t drop, hit or apply strong shock to it.
4. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme
temperatures.
FREQUENCY RESPONSE GRAPH
To Next Page
Loading...