Need help?Do you have a question about the Pyle PIRT30 and is the answer not in the manual?
General| Measurement Range | -58°F to 1022°F (-50°C to 550°C) |
|---|---|
| Accuracy | ±2°C/2% whichever is greater |
| Response Time | <500ms |
| Emissivity | 0.95 (Fixed) |
| Distance to Spot Ratio | 12:1 |
| Power | 9V battery |
| Resolution | 0.1°C/0.1°F |
| Temperature Range | -58°F to 1022°F (-50°C to 550°C) |
| Display | LCD with backlight |
| Battery | 9V battery |
| Auto Power Off | Yes |
| Spectral Response | 8-14 µm |
Use extreme caution with the laser pointer and follow safety guidelines for use near explosive areas.
Step-by-step guide for performing non-contact temperature measurements using the IR function.
Step-by-step guide for performing contact temperature measurements using the Type-K thermocouple.
Details on adjusting the emissivity setting for accurate IR temperature readings.
How to program and utilize high and low temperature alarm thresholds.
To Next Page