Do you have a question about the Pyle PLA4278 and is the answer not in the manual?
Amplifier class | - |
---|---|
Frequency range | 20 - 50000 Hz |
Output impedance | 2 Ω |
Audio output channels | 4.0 channels |
Peak power per channel | 500 W |
Signal-to-Noise Ratio (SNR) | 90 dB |
Total Harmonic Distortion (THD) | - % |
Bridge-mode power output per channel (4 Ohm) | 2 W |
Speakers connectivity type | Clamp terminals |
Multichannel pre out connectivity | RCA |
Purpose | Car |
Product color | Black |
Connectivity technology | Wired |
Power protection features | Overload, Short circuit |
Depth | 56 mm |
---|---|
Width | 260 mm |
Height | 370 mm |