Need help?Do you have a question about the Pyle PLCM18BC and is the answer not in the manual?
General| Megapixel | - MP |
|---|---|
| Auto focus | - |
| Photo feature | No |
| White balance | Auto |
| Operating voltage | 12 V |
| Maximum frame rate | - fps |
| Minimum illumination | 0.2 lx |
| Maximum image resolution | 656 x 492 pixels |
| Maximum video resolution | - pixels |
| Viewing angle, horizontal | 170 ° |
| Cable length | 5 m |
| Mounting type | Stand |
| Product color | Black |
| Manual focus | Yes |
| Depth (imperial) | 1.26 \ |
| Width (imperial) | 10 \ |
| Height (imperial) | 1.3 \ |
| Power source type | DC |
| Compatible memory cards | Not supported |
| Storage temperature (T-T) | -40 - 95 °C |
| Operating temperature (T-T) | -20 - 75 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 32 mm |
|---|---|
| Width | 254 mm |
| Height | 33 mm |
Read all warnings carefully before installation and use to prevent injury or property damage.
Use camera as an aid; never rely on it solely. Always check surroundings visually.
Understand display differences, wide-angle lens effects, limited view, and cleaning advice.
System includes camera and wiring. Additional accessories may be needed for secure installation.
Connect DC 12V power to reverse light and RCA cable to the display monitor.
Locate reverse light wiring, connect power, mount camera, and route video cable.
Ensure secure mounting, cable slack for adjustment, and test camera before use.
To Next Page
