Pyle PLD7MU User Manual

INSTRUCTIONS
BASIC OPERATION
1, SOURCE OW/OFF
Press SRC button on panel or I'VVR button on remote control quickly to power on.
Press SRC button on panel or PWR button on remote control longer to power off.
2, PLAYING SOURCE CHOOSE
Press SOURCE button on remote Control^ unit will switch sources in the following
sequence: RADIO -+ ■ DVD -* ■ AUX
3, MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output press again to back to sound output.
4. V Or.LIME AI3JUS1 ’MENT
1) Press VOL+/VOL- button on panel, VOL +/VQL- button on remote control or touch
button on display to adjust volume level,
2) Ilie volume setting on this unit is 0 - 39.
JONH MODE ADJUSTING CSEL>
Pivss SEI. button on remote control or SEI button on the panel to choose your desired
(une mode:
VOl.-t^KAS -+TKE
t_
UR
E r /R
J
MOTE:
1) DVD playing mode, MDP & User will be automatically activated.
2) After 5 seconds you choose desired mode., do not adjust volume button, The mode
will automatically take you back to status before adjustment.
5. R E SET
1) if unit is not working correctly, you should press the RES button. This wiJ] reset the
radio and should start working correctly afterwards.
2) After reset,, all settings will resume back to the factory default settings.
06

Pyle PLD7MU Specifications

General

Brand	Pyle
Model	PLD7MU
Category	Car Video System
Language	English