EasyManua.ls Logo

Pyle PLUTV45BTR - Product Details; Whats in the Box; Technical Specifications

Pyle PLUTV45BTR
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This products can expose you to a chemical or group of checmicals, which
may include ”Di (2-ethylhexyl) phthalate (DEHP)” which is known in the
state of California to cause cancer, birth defects, or other reproductive harm.
For more info, go to https://www.p65warnings.ca.gov/.
What’s in the Box:
(1) 4'' Amplied Main Speaker
(1) 4'' Passive Support Speaker
Speaker Connection Wires, 6.6' ft.
Wire Butt Connectors, 16-22 AWG
(2) 5.9’ x 0.7’ x 0.2’ -inches EVA Pads
(2) 6.5’ x 0.7’ x 0.08’ -inches EVA Pads
RGB Connection Wire, 6.6’ ft.
Remote Control
Warranty card
Owners Manual
Technical Specs:
Speaker Power: 800 Watt MAX
Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
Amp Type: 2-Channel, Class D
Marine Grade Waterproof Rating: IP-X5
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Frequency Response: 85Hz-20kHz
Impedance: 4 Ohm
Magnet Type: 20 oz. Circuit
Mid-Woofer Voice Coil Type: 1.0'', Aluminum
Sensitivity: 90 dB +/- 2 dB @ 1M/1W
Anti-Thump Turn-On
Soft Turn On/O
T.H.D: <0.05%
S/N Ratio: >95dB
Channel Separation: >65dB
Amp Freq. Response: 10Hz- 30 kHz
Fuse: 1 x 10A
Power Supply: DC 12V
Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.25’ ~ 2.0’ -inches
Remote Control Battery Operated Requires (1) x CR2025 Batteries (Included)
Battery Type: 3.2V Lithium-ion 150mAh
Speaker Dimensions: 5.6’ x 8.4’ x 7.3’ -inches, with Bracket (Each)
www.PyleUSA.com
5

Related product manuals