Model: PMD58
Metal Detector Pinpointer
Note – The metal detector pinpointer should be used in addition with a metal detector
When a metal detector finds the approximate position of the metallic object, the object
can sometimes be severely oxidized. This makes it difficult to differentiate between the metal
object and its surroundings. At this point the pinpointer should be used to locate the metal
object.
Please read the instructions before use.
Inserting Battery
(Please note, the 9V battery required is not included)
Rotate the battery cover counter-clockwise
cover and housing. Remove the battery cover
Battery Cover:
Located at the base of the pinpointer
and align the small triangles on the battery
Note:
Turn the sensitivity knob to the suitable critical location, in order to ensure the correct operation.
Turn on the power, the buzzer sound a tone,
and the LED is lightened.
Slowly adjust the knob clockwise,making the
buzzer just stop sound,and the LED is extinguished.
To Next Page
Need help?
General
