www.PyleUSA.com6 www.PyleUSA.com 7
• Open the BT for pairing, after successful pairing, there will be a sound prompt.
B. BUTTON FUNCTION
• " /SET" button, press rst time to pause the playing song, press again to
continue playing.
• " /-" button, short press to play the previous song, press and hold to
reduce the input volume.
• " /+"button, short press to play the next song, press and hold to
increase the input volume.
• [MODE] Selecting button, switching the functional model, select USB,
REC, BT in order.
C. USB RECORDING OPERATION
• Press the "MODE" key to select the REC state.
• Press the “ /REC” button to start recording, the LED screen shows the
recording time. Press the “ /REC” button again to pause the recording.
• Press the"MODE" key back out the recording.
D. COMPUTER SOUND CARD
When the computer data cable is connected, it will enter to PC playing
states automatically (The computer will install the driver automatically at
the rst connection, need to wait until the installation is nished to play
or record)
E. EQ control key, there are 6 kinds of sound effects.
(Normal/Rock/Pop/CIassic/Jazz/Country)
BUILT-IN DSP
You can choose to assign one of 16 eect programs to your mix.
Eects List as below:
USB FOR DATA TRANSFER AND RECORD, AND POWER SUPPLY
USB FOR POWER SUPPLY ONLY
Connect with PC USB port, Power bank or power socket to supply power to
mixer. It must meet the following requirements:
Output voltage: 4. BV to 5. 2V
Output Current: 1A or even more
To Next Page
Loading...
Need help?
General
