Pyle PPRE70BT User Manual

Safety Precaution
Read all documentations carefully before operating the equipment.
Retain this manual for future reference.
Follow all instructions printed on unit for proper operation.
Do not opern cover (or back cover) to reduce the risk of electric shock or re.
There are no User serviceable parts inside. Refere servcing to qualied service
personnel.
This symbol is used to alert the operator to the presence of important
operating instructions and precautions detailed in the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are
present within the products enclosure that may pose a risk of electric shock.
Warning:
To avoid re or risk of electric shock, do not expose this unit to rain or moisture.
Notes:
• Make sure power outlets conform to the power requirements listed on the back of
the unit.
• Main Voltage must be correct and the same as that printed on the rear of the unit.
• Do not use the unit if the electrical cord is frayed or broken.
• The unit shall not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, shall be placed on unit.
• The unit shall be connected to a mains socket outlet with a protective earth
ground connection.
• Do not use equipment if Power plug is damaged, smashed, bent or pinched.
Warning:
• Using, adjusting or changing program control beyond this specication may cause
dangerous radiation.
• The unit should be serviced by qualied service personnel.
• When repairing, use only same specication parts.
Notes:
• Select the voltage requirement by adjusting the voltage selector switch at the rear
panel.
• Make sure that the power of the equipment is o and disconnected from the main
voltage before switching the voltage selector to the required setting. We will not
be responsible for damages arising from the improper installation, wiring or
operation due to the fault or negligence of the user.
www.PyleUSA.com
3
Control & Layout Conguration
1. POWER SWITCH: Press to switch the power unit ON or OFF.
2. 3.5MM INPUT 1: To connect with other music sources with 3.5mm Jack
3. Headphone output: To connect with headphones
4. XLR MIC INPUT: 1/4” /XLR combo jack for microphone
5. LEVEL CONTROL: For microphone level controls
6. BASS: Adjusts the bass frequency of main output
7. MID: Adjusts the mid frequency of main output
8. TREBLE: Adjusts the high frequency of main output
9. BALANCE: Adjusts the balance of main output
10. MASTER VOLUME: Adjusts the master volume of main output
11. USB DISPLAY SCREEN: To show the name of the songs from USB, song time
12. USD SLOT/SD CARD SLOT: USB slot capacity is up to 32G
13. TAPE MONITOR: Press this button to use ‘TAPE input/output from rear panel
sources only.
14. INPUT SELECTOR: To choose dierent input sources
15. MP3 CONTROL BUTTON PART:
• MODE: Press to select the USB/SD/FM/BT/Recording mode. The unit is set in
MP3 mode and only when you press “MODE” button to go to other mode.
• REPEAT: There are 3 types of Repeat and they will show on the screen, and you
can press this button to select the favorable repeat type, such as SINGLE/REPEAT
/RANDOM/ALL REPEAT. Press this button for more than 3 seconds, it will go to
Folder searching function, press Prev/Next buttons to go to the previous folder
or the next folder. Press REPEAT button again to exit FOLDER searching.
• PLAY: Press to start to play the tracks. When in RECORDING MODE, press this
button to start recording.
• PREVIOUS TRACK: Press to play the previous track from USB or SD card.
When in FM mode, it is for previous station.
• NEXT TRACK: Press to play the next track. When in FM mode, it is for next station.

Pyle PPRE70BT Specifications

General

Brand	Pyle
Model	PPRE70BT
Category	Amplifier
Language	English