Pyle PSS6 User Manual

www.PyleUSA.com2
CAUTION!
RISK OF ELECTRIC SHOCK. DO NOT OPEN
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR BOTTOM COVERS.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DISCONNECT POWER CORD BEFORE REMOVING BACK PANEL COVER
TO ACCESS GAIN SWITCH.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
The PSS6 PYLE PRO Multi-Speaker Selectors lets you connect up six separate
pairs of speakers to your stereo receiver/amplier. The control center is especially
convenient if you have speaker sets in dierent rooms and want to turn them on
and o independently. You can enjoy the convenience and exibility of listening
to multiple speaker pairs simultaneously.
The control center lets you use one to six sets of speakers at a time, and is
designed to operate with a stereo receiver/amplier that has a maximum of 100
watts per channel, and with speaker systems that have a minimum impedance of
8 ohms (see “Impedance Chart” on page 5)
PREPARATIONS
• Use the PYLE PRO Speaker Selectors only with ampliers rated at 100 watts per
channel or less.
• Your PYLE PRO Speaker Selector is designed to accept any size cable up to 14
gauge non-terminated speaker wire.

Pyle PSS6 Specifications

General

Type	AV repeater
Audio system	stereo
Product color	Black
LED indicators	No
Maximum resolution	- pixels
Compatible products	AS
Audio (L/R) out	6
RJ-45 input ports	0
External power adapter	Yes

Weight and Dimensions

Weight	115 g
Dimensions (WxDxH)	250 x 150 x 50 mm