Need help?Do you have a question about the Pyle PWBH18 and is the answer not in the manual?
General| Impedance | 30 Ω |
|---|---|
| Driver unit | 10 mm |
| Ear coupling | Intraaural |
| Headphone frequency | 20 - 20000 Hz |
| Total Harmonic Distortion (THD) | 0.1 % |
| Standby time | 180 h |
| Battery capacity | 80 mAh |
| Operating temperature (T-T) | 0 - 40 °C |
| Bluetooth | Yes |
| Bluetooth version | 4.0 EDR |
| Bluetooth profiles | A2DP, AVRCP |
| Connectivity technology | Wireless |
| Headset type | Binaural |
| Product type | Headset |
| Product color | Blue |
| Wearing style | Ear-hook |
| Recommended usage | Sports |
| Microphone type | Built-in |
Weight and Dimensions| Depth | 65 mm |
|---|---|
| Width | 43 mm |
| Height | 9 mm |
| Weight | 23 g |
Complies with IP46 standards for normal operation in water, designed for powerful water jets only.
Ensure the watertight cap of the micro USB plug is closed to prevent water ingress.
Water droplets in earphone/microphone holes do not cause trouble but may temporarily reduce performance.
Ensure correct left/right placement, hang neckband, and twist headset for a snug fit.
Change earbud size or adjust position for optimal fit and better sound quality.
Adjust the ring on the neckband before placing headset on ears for a secure fit.
Red LED indicates charging, blue LED indicates fully charged. Takes approximately 25 minutes.
Low battery triggers a beeping alarm and blinking red LED, followed by unit shutdown.
Hold Function key for 7s until lights flash, then search device for 'PWBH18' and connect.
Use '+' to increase volume/restart track, '-' for volume/next track, Function key for pause/play.
Pick up/hang up calls with Function key; adjust volume with +/-; use mute function.
Redial last call by pressing Function key twice; access voice command by holding Function key.
Hold the Function key to reject an incoming call.
Hold Function key & '+' together in Off mode to reset registration history.
Do not damage cables or touch metal parts to prevent fire, disconnection, or electric shock.
Avoid hot cars, high temperatures, humidity, direct sunlight, and prolonged wet/damp use.
Do not disassemble; keep away from children; avoid impact, vibration, and strong magnetic forces.
Risk of explosion if battery is replaced incorrectly. Dispose of used batteries properly.
Equipment tested and found compliant with FCC limits for Class B digital devices.
Measures to correct harmful interference include reorienting antennas or increasing separation.
To Next Page
