Pylex 11060 User Manual

ITEM # 11060 -
Système de store pour patio - Noir / decksunblind system - Black
WWW.PYLEX.COM 1 800-264-1881
environ
approximately
environ
approximately
4⅜"
4⅜"
Pas de vis
Not screw
Pas de vis
Not screw
Pas de vis
Not screw
5 vis par
équerre
5 screws
per bracket
4 vis par équerre
4 screws
per bracket
PEUT ÊTRE UTILISÉ AVEC UN 4 X 4 OU 6 X 6 (voir page suivante)
CAN BE USED WITH A 4 X 4 OR 6 X 6 (see next page)
BARRE
D’ATTACHE
BARRE
D’ATTACHE
DE L’AUTRE CÔTÉ / THE OTHER SIDE
NUMBER OF SCREW EACH PLANK
BY SIDE ON SIDE - FLAT BAR
NOMBRE DE VIS SUR CHAQUE
PLANCHE PAR CÔTÉ SUR LE
CÔTÉ DES BARRES D’ATTACHE
FLAT BAR
FLAT BAR
x
x
x
Page 1 de/of 2
11 planches de 5/4 (1¼") ou utiliser un 1" x 6"
(Planche à clôture)
11 planks of 5/4 (1¼") or use 1" x 6" (Board fence)
= 22x
= 10x
5"
¾"
= 22x
¾
"
4¾"
METTRE
SUR UN
SEUL
CÔTÉ
PUT
ONE
SIDE
= 66x
A
= 33x
B
C
E
D
= 1x
F
RÈGLE
RULE

Pylex 11060 Specifications

General

Brand	Pylex
Model	11060
Category	Accessories
Language	English

Summary

Pylex Deck Sunblind System: Components and Hardware

System Identification and Compatibility

Product item number and compatibility with 4x4 or 6x6 posts.

Hardware Quantities and Placement

Details on screws, brackets, and rule quantities for installation.

Plank and Screw Requirements

Specifies number of planks and screw counts per bracket for flat bar installation.

Deck Sunblind Installation with Post Size Variations

Recommended Plank Length and Quantity

Guidance on maximum plank length and required quantity for a 49" high sunblind.

Installation for 4x4 Posts

Instructions for corner cutting and installation with 4x4 posts.

Installation for 6x6 Posts

Instructions for installation with 6x6 posts, noting no corner cutting is needed.