SET-UP
1 Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
Secure velcro tab on the bottom
of the rocker.
2 Place the Sound Rocker so
that the control panel is less than
7 ft./2.1 meters from the power
source.
3 Connect the power adapter to
the power DC port on the control
panel. Then plug the power adapter
into an electrical outlet.
4 Twist the volume knob on
the control panel to click on the
power.
3
CAUTION:
Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.
5 If the unit is receiving power
press the channel selector
button and a channel light will
appear, you will hear the radio
or static. Press the channel
selector button 4 times or until
the LED turns off to power off
the wireless.
To Next Page
