Need help?Do you have a question about the Pyramid 903G and is the answer not in the manual?
General| Total Harmonic Distortion | 0.01% |
|---|---|
| Input Impedance | 47kΩ |
| Boost/Cut | ±12dB |
| Signal to Noise Ratio | >90dB |
| Frequency Response | 20Hz - 20kHz |
| Center Frequencies | 1kHz, 16kHz |
| Weight | 5.5 lbs |
Explanation of using the ten band equalizer for sound tuning.
Warnings about speaker wire grounding and connection to prevent damage.
Guidance on matching speaker power handling to amplifier output.
Information on system voltage requirements and ground system usage.
Instructions to prevent short-circuits during installation and wiring.
Recommendations for installing the amplifier for optimal cooling.
Specifies the required DC voltage range for the amplifier.
Details on per-channel and peak output power in watts.
To Next Page
