To Next PageTo Next Page
Need help?Do you have a question about the Pyramid PM1008 and is the answer not in the manual?
General| Brand | Pyramid |
|---|---|
| Model | PM1008 |
| Category | Music Mixer |
| Language | English |
Connects a balanced or unbalanced low impedance microphone with XLR-type or 1/4" plug.
Connects a balanced or unbalanced low impedance microphone with 1/4" plug.
Adjusts the tone frequencies of the MIC inputs processed through the mix.
Controls the MIC levels as they enter the mix.
Lowers the level of input sources for microphone use.
Lets you choose the input source to play for each channel.
Allows monitoring of the selected audio input source before mixing.
Indicates the levels of the Left and Right Master Channels.
Controls the mixer's overall volume level.
Selects the mixer's output mode (mono or stereo).
Tailors the mixer output to suit taste or environment.
Allows connection of a 12V/3W lamp to light the panel.
Turns the mixer unit on or off.
Engages or disengages the equalization module.
Controls the mixer's overall booth volume level.
Allows listening to CUE material or active program.
Adjusts the headphone's volume level.
Accepts headphones with a 1/4" plug.
Selects the input source for the Crossfade Slider.
Smoothly switches between assigned input sources.
Connects high-level audio sources like CD players, tape decks, tuners, or VCRs.
Connects the mixer to a receiver or amplifier using RCA or 1/4" plugs.
Connects the mixer to a second amplifier for DJ booth speakers.
Connects the mixer to a tape deck for recording the mixed program.
For turntables (Phono) or high-level input sources (Line).
Sets the input type for Phono/Line jacks.
For securely connecting turntable ground wire.
Connects a microphone via a 1/4" plug.
Connects a balanced or unbalanced low impedance microphone with XLR-type or 1/4" plug.
Connects a balanced or unbalanced low impedance microphone with 1/4" plug.
Adjusts the tone frequencies of the MIC inputs processed through the mix.
Controls the MIC levels as they enter the mix.
Lowers the level of input sources for microphone use.
Lets you choose the input source to play for each channel.
Allows monitoring of the selected audio input source before mixing.
Indicates the levels of the Left and Right Master Channels.
Controls the mixer's overall volume level.
Selects the mixer's output mode (mono or stereo).
Tailors the mixer output to suit taste or environment.
Engages or disengages the built-in Echo effect.
Controls the time period during which the echo is repeated.
Adjusts the delay time for the echo effect.
Controls the depth of the echo effect.
Controls the volume level of the sound effect within the mix.
Controls the pitch of the selected sound effect.
Lets you create special sound mixes from preprogrammed effects.
Allows connection of a 12V/3W lamp to light the panel.
Turns the mixer unit on or off.
Engages or disengages the equalization module.
Controls the mixer's overall booth volume level.
Allows listening to CUE material or active program.
Adjusts the headphone's volume level.
Accepts headphones with a 1/4" plug.
Selects the input source for the Crossfade Slider.
Smoothly switches between assigned input sources.
Connects a balanced or unbalanced low impedance microphone with XLR-type or 1/4" plug.
Connects a balanced or unbalanced low impedance microphone with 1/4" plug.
Adjusts the tone frequencies of the MIC inputs processed through the mix.
Controls the MIC levels as they enter the mix.
Lowers the level of input sources for microphone use.
Lets you choose the input source to play for each channel.
Allows monitoring of the selected audio input source before mixing.
Indicates the levels of the Left and Right Master Channels.
Controls the mixer's overall volume level.
Selects the mixer's output mode (mono or stereo).
Tailors the mixer output to suit taste or environment.
Selects the function of the sampler section.
Controls the start and stop of the sampling process.
Allows monitoring of the desired sample signal.
Adjusts the volume of the desired sample signal.
Controls the sampled signal's pitch.
Allows connection of a 12V/3W lamp to light the panel.
Turns the mixer unit on or off.
Engages or disengages the equalization module.
Controls the mixer's overall booth volume level.
Allows listening to CUE material or active program.
Adjusts the headphone's volume level.
Accepts headphones with a 1/4" plug.
Selects the input source for the Crossfade Slider.
Smoothly switches between assigned input sources.
Connects sources like tuners, CD players, camcorders, or VCRs to Line inputs.
Connects turntables to Phono inputs and secures ground wire.
Connects mixer output to speaker system via RCA or 1/4" jacks.
Connects mixer output to a recorder for recording the program.
Connects mixer output to a second amplifier for DJ booth speakers.
Guidelines for protecting hearing, starting volume low and increasing gradually.
Steps for powering on the mixer and connected devices.
How to monitor audio input sources before mixing them in.
Procedure for selecting and mixing up to ten input sources.
Using EQ sliders to tailor sound and engaging the EQ module.
Incorporating voice into the mix and using Talkover mode.
Adjusts Bass and Treble for microphone inputs.
Independent controls to adjust microphone levels within the mix.
Steps for recording audio samples up to 12 seconds.
Plays a recorded sample one time when START/STOP is pressed.
Plays a recorded sample repeatedly until START/STOP is pressed.
Rotates SAMPLE PITCH control to adjust playback speed.
Rotates SAMPLE LEVEL control to adjust sample volume.
