Two people are recommended for easy assembly. One person can easily hold
the pieces in position while the second person aligns the slots and tabs. Once
all of the pieces are in position the unit become self-supporting so you can
safely and easily secure the pieces with the Shoulder Tabs and hardware.
Shoulder Tabs
Slide Over Carriage Bolts
In Base
Position the front and rear
panels while the second person
holds in place.
Add the first Side Panel by
inserting the Front and Back
Panel tabs into the corresponding
slots on the Side Panel
Add the last panel by
repeating step 2. Verify all
panels are aligned with their
respective slots and tabs.
Insert Shoulder Tabs in the
slots on the Side Panels and
secure hardware as instructed
on Page 7.
To Next Page
Loading...