V2 GSM Installation Manual
Pyronix Ltd Page: 18
5.13 RINGS BEFORE ANSWER [177]
The remote menu of the V2 GSM is accessed when the telephone number of the V2 GSM
is dialled. The V2 GSM will only answer after it has recognised the programmed number
of rings.
Press the [ or ] keys to scroll to
‘RINGS BEFORE ANSWER’ or enter
‘177’.
Press B or T to choose the
number of rings or select the number:
0 = Disabled, 1 = 1 Ring
2 = 2 Rings,
3 = 3 Rings = Default
4 = 4 Rings, 5 = 5 Rings
6 = 6 Rings, 7 = 7 Rings
8 = 8 Rings, 9 = 9 Rings
Press t
5.14 ENABLE REMOTE CONTROL [180]
If this function is enabled the ‘remote control’ menu is going to be accessible for a user.
The user can either access this by either dialling into the V2 GSM or pressing the ‘99’
when a call is made and acknowledged by the user. For more info on this refer to the user
manual.
The remote control menu allows a user to listen in and talk into the property via the
onboard speaker/microphone, or listen in/talk into the property via a remote
speaker/microphone or control all outputs on the V2 GSM.
Press the [ or ] keys to scroll to
‘ENABLE REMOTE CONTROL’ or
enter ‘180’.
Press B or T to choose between
Yes or No or select the number:
0 = No, 1 = Yes = Default
Press t
To Next Page
Loading...