V2 GSM Installation Manual
Pyronix Ltd Page: 19
5.15 TELEPHONE NUMBER INPUT ALLOCATION [200]
This function is used to allocate the inputs for each telephone number, so when an input
(or inputs) on the V2 GSM system activates, it will dial the programmed telephone
number.
Press the [ or ] keys to scroll to
‘TEL NUMBER INPUT
ALLOCATION’ or enter ‘200’.
Press B or T to choose the
telephone number enter the function
shortcut number (see below). Press
t
Enter the individual inputs that, when
activated will dial telephone number
Default = no allocations
See below for the input mapping.
Shortcut function numbers:
201: Enables inputs for tel #1 206: Enables inputs for tel #6
202: Enables inputs for tel #2 207: Enables inputs for tel #7
203: Enables inputs for tel #3 208: Enables inputs for tel #8
204: Enables inputs for tel #4 209: Enables inputs for tel #9
205: Enables inputs for tel #5
The inputs are selected by most of the keypad keys – the mapping is shown below:
Keys Inputs Display Keys Inputs Display
1
Keypad Input 1
1
9
RIX Input Z3
9
2
Keypad Input 2
2
0
RIX Input Z4
0
3
Keypad Input 3
3
I
RIX Input Z5
A
4
Keypad Input 4
4
J
RIX Input Z6
B
5
Keypad Input 5
5
K
RIX Input Z7
C
6
Keypad Input 6
6
L
RIX Input Z8
D
7
RIX input Z1
7
[
Low Battery Report
L
8
RIX Input Z2
8
]
Test Reporting T
5.16 COPY TEL#1 ALLOCATION TO ALL [250]
It is possible to copy all telephone number 1 input allocations to all the rest of the
telephone numbers by selecting function 250.
Press the [ or ] keys to scroll to
‘COPY TEL#1 ALLOC/ TO ALL’ or
enter ‘250’.
Press B or T to choose between
Yes or No or select the number:
0 = No = Default,
1 = Yes
Press t
To Next Page
Loading...