Pyronix V2 GSM - Input Diagnostics and Status

V2 GSM Installation Manual
Pyronix Ltd Page: 23
5.22 INPUT 1-6 RESTORE VOLTAGE [530]
This function sets the restore voltage for each individual input (the V2 GSM onboard
inputs only, function not available the RIX inputs).
Press the [ or ] keys to scroll to
‘INPUT 1-6 RESTORE VOLTAGE’ or
enter ‘530’.
Press B or T to choose the input
number or enter the function shortcut
number (see below).
Press t
Press B or T to choose the
restore voltage. The choices range
from 0V and then increases in 0.5V to
15V.
Press t
5.23 INPUT 1-6 DIAGNOSTICS [550]
This displays the status of the 6 inputs onboard the V2 GSM.
Press the [ or ] keys to scroll to
‘INPUT 1-6 DIAGNOSTICS’ or enter
‘550’.
Press B or T to choose the input
number or enter the function shortcut
number (see below).
Press t
The display shows the voltage of the
current status of the input.
Press t
Shortcut Function Numbers:
551: Diagnostic for input#1
552: Diagnostic for input#2
553: Diagnostic for input#3
554: Diagnostic for input#4
555: Diagnostic for input#5
556: Diagnostic for input#6