Pyronix V2 GSM - V2 GSM Installation Guide; V2 GSM Printed Circuit Board Layout; V2 GSM System Overview

V2 GSM Installation Manual
Pyronix Ltd Page: 37
CHAPTER 7: INSTALLATION SECTION
7.1 THE V2 GSM PRINTED CIRCUIT BOARD
Terminals Description Terminals Description
+12V
+12v Auxiliary Supply
0V
0V Auxiliary Supply
0V
0V Auxiliary Supply
+12M
Microphone Connection
IN1
Input 1
MIC-
0V Microphone Supply
IN2
Input 2
MIC+
+12V Microphone Supply
IN3
Input 3
SPKA
Speaker Connection
IN4
Input 4
SPKB
Speaker Connection
IN5
Input 5
PGM1
PGM 1
IN6/S
Input 6 / Abort Input
PGM2
PGM 2
D1/K-
0V Auxiliary Supply
PGM3
PGM 3
D2/K+
+12V Auxiliary Supply
PGM4
PGM 4
D3/A
RS485 ‘A’ Data Bus
TAM1
Tamper Terminals
D4/B
RS485 ‘B’ Data Bus
TAM2
7.1.1 System Overview:
Inputs: Onboard
6 inputs
Remote (PCX-RIX8):
Max devices:
8 inputs
1 x PCX-RIX8 (input module)
Maximum inputs:
14 inputs
Outputs On board
4 outputs
Remote (PCX-ROX16R)
Max devices:
16 outputs
3 x PCX-ROX16R (output module)
Maximum outputs:
52 outputs
Speakers Onboard
1 speaker
Remote
1 x speaker max
Microphones Onboard
1 microphone
Remote
1 x microphone max