V2 GSM Installation Manual
Pyronix Ltd Page: 46
Press the x key to return to the Main Menu.
(Go to Program Telephone Numbers).
If you are using SMS messaging:
Enter code 831 SMS msg for input 1 then Press the t key.
Enter the text for the message required then press the t key.
Press the x key to return to the Main Menu.
Enter code 931 Message type for tel #1 press the t key this will show 0 = VOICE
MESSAGE press the 2 key this will now show 2 =SMS messaging press the t key.
Press the B arrow [932] Message type for tel #2 press the t key press the 2 key to
show 2= SMS MESSAGE then press the t key.
Press the B arrow [933] Message type for tel #3 press the t key press the 2 key to
show 2=SMS message then press the t key.
Press the x key to return to the Main Menu.
PROGRAMMING TELEPHONE NUMBERS
Enter Code 901 Telephone number #1 press the t key.
Enter the first Telephone number then press the t key.
Press the B arrow {902} Telephone #2 Press the t key.
Enter the Second Telephone number then press the t key.
Press the B arrow {903} Telephone number #3 press the t key.
Enter the third Telephone number then press the t key.
Press the x key to return to the Main menu enter code 999 quit/exit
programming press the t key.
The date and time should appear after a short while and the signal strength bars should
be visible.
The V2 GSM is ready for use.
To Next Page
Loading...