10
© 2012 Directed. All rights reserved.
Advanced Commands: (Level 1)
Press and release the button 1 time. The transmit LED illuminates in
sets of single flashes to indicate Level 1.
Silent Lock
Press and release
The doors lock (if connected), without horn honks.*
Silent Unlock
Press and release
Doors unlock (if connected), without horn honks.*
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting.
Note
Remote Start must be On to use this feature.
AUX 1
Press and release
AUX
Activates (or if On, deactivates) the Aux 1 output.
* The optional Horn Honk feature must be connected.
To Next Page
Loading...
