Python 474 User Manual

Commands
13
© 2011 Directed Electronics. All rights reserved.
Basic commands (Direct Access)
Lock
Press and release
The doors lock and the horn honks (if connected) and
parking lights flash once. The
LOCKED
text and beeps play to confirm
and the System Status Icons update. If Valet mode* is On the doors
lock and the
VALET
text and tone play. Exit Valet mode to Lock the
system normally.
If the door was open when locking, you are notified of an active zone
immediately after locking the system. The horn in the vehicle “honks”
again. The 2-way remote control sounds a short “error” tone, and the
LCD displays the door icon.
Note: the optional door input and horn honk must be connected for
the system to give notification.
To Lock and Panic
Press and hold
The system Locks (or Locks in Valet) and, after 2 seconds, sounds
the horn and flashes the parking lights. The
PANIC
text displays
and horn honks to confirm. Press the
or button to stop the
output.
Unlock
Press and release
The doors unlock (if connected), and the horn honks (if connected)
and parking lights flash twice. The
UNLOCKED
text and beeps play to
confirm and the system status icons update. If Valet mode* is On the
doors unlock and the
VALET
text and tone play.
6:30

Python 474 Specifications

General

Brand	Python
Model	474
Category	Remote Starter
Language	English