Need help?Do you have a question about the Q Acoustics Concept 500 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Recommended usage | Universal |
| Impedance | 6 Ω |
| Frequency range | 41 - 30000 Hz |
| Crossover frequency | 2500 Hz |
| Tweeter | Yes |
| Tweeter diameter | 28 mm |
| Speaker placement | Floor |
| Mid-range driver diameter | 165 mm |
| Number of mid-range drivers | 2 |
| Recommended amplifier power (max) | 200 W |
| Recommended amplifier power (min) | 25 W |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 400 mm |
| Height | 1150 mm |
| Weight | 42000 g |
Provides warnings and operational instructions for safe use of the loudspeakers.
Details on safely unpacking and handling the loudspeakers, including weight considerations.
Guidance on installation, servicing, and explanation of product symbols like hazard warnings.
General advice on speaker placement within a room for optimal sound.
Step-by-step guide for securely installing the speakers on the floor using provided feet.
Advice on placement relative to walls, use of rear port bungs, and sound tuning.
Tips for finding the best balance between bass quantity, quality, and vocal intelligibility.
Description of speaker terminals and the bi-wireable crossover configuration.
How to connect speakers using standard single-wire setup with an amplifier.
Instructions for setting up bi-wire connections, requiring removal of terminal links.
How to adjust high-frequency response by repositioning the crossover jumper.
Instructions for cleaning and maintaining speaker cabinets using gentle methods.
Advice on cleaning grilles and handling drive units carefully to prevent damage.
To Next Page
