Need help?Do you have a question about the Q Acoustics Media 4 and is the answer not in the manual?
General| Audio decoders | - |
|---|---|
| RMS rated power | 100 W |
| Audio output channels | - channels |
| Signal-to-Noise Ratio (SNR) | 85 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Subwoofer included | Yes |
| Subwoofer location | Built-in |
| Cables included | AC, Audio (3.5mm), RCA |
| Product color | Black |
| Frequency range | 20 - 20000 Hz |
| Bluetooth profiles | A2DP |
| Height (with stand) | 105 mm |
| Apple docking compatibility | Not supported |
| Soundbar dimensions (WxDxH) | 1000 x 90 x 142 mm |
| Bluetooth version | 4.0 |
| HDMI ports quantity | 0 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
Weight and Dimensions| Soundbar weight | 4900 g |
|---|
Mount the soundbar on a TV stand using the pre-drilled holes for stability.
Securely mount the soundbar on a wall using 3mm countersunk screws (not included).
Control soundbar power and source selection using button press durations (1s for on/source, 1-3s for off).
Pair your device with the soundbar using NFC technology for quick connection.
Configure your device settings for optimal Bluetooth connectivity with the soundbar.
To Next Page
