Need help?Do you have a question about the Q Acoustics M2 and is the answer not in the manual?
General| Equalizer | Yes |
|---|---|
| RMS rated power | 80 W |
| Audio output channels | - channels |
| Number of speakers | 2 |
| Crossover frequency | 340 Hz |
| Signal-to-Noise Ratio (SNR) | -85 dB |
| Total Harmonic Distortion (THD) | 0.9 % |
| Subwoofer location | Built-in |
| Product color | Black |
| Wall mountable | - |
| Audio formats supported | MP3, SBC, apt-X |
| Bluetooth version | 4.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Soundbar power consumption | 100 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 11 W |
| Package depth | 428 mm |
| Package width | 615 mm |
| Package height | 178 mm |
| Package weight | 7900 g |
| Cables included | AC, HDMI |
| Number of products included | 1 pc(s) |
Weight and Dimensions| Depth | 338 mm |
|---|---|
| Width | 550 mm |
| Height | 93 mm |
| Soundbar weight | 5800 g |
Includes FCC, Industry Canada, and Bluetooth regulatory statements for compliance.
Provides critical instructions for safe installation, operation, and maintenance to prevent hazards.
Identifies all input/output ports including HDMI, Optical, Analogue, Bluetooth Pair, and AC Mains.
Details the HDMI (ARC) and Digital Optical input connections on the rear panel.
Details EQ switch, power/standby modes, and Intelligent Pre-Amplifier (IPA™) functionality.
Explains Auto On/Off, Auto On/Off times for different inputs, and auto source selection priority.
To Next Page
