Q Acoustics M2 User Manual

9
Use scenarios
Important Cautions:
• Q Acoustics accepts no liability for damages caused by incorrect assembly, installation or improper use.
• If you choose to place your TV ontop of this soundbar please do so with caution. The TV base must not
extend over the sides of the soundbar and the TV must sit in the centre of the Qm2.
• For best performance it is recommended that this product is used ontop of an AV stand or inside a cabinet.
Please see illustrations below.
• Do not exceed the maximum TV weight limit of 25kg when placing a TV ontop of the Qm2.

Q Acoustics M2 Specifications

General

Equalizer	Yes
RMS rated power	80 W
Audio output channels	- channels
Number of speakers	2
Crossover frequency	340 Hz
Signal-to-Noise Ratio (SNR)	-85 dB
Total Harmonic Distortion (THD)	0.9 %
Subwoofer location	Built-in
Product color	Black
Wall mountable	-
Audio formats supported	MP3, SBC, apt-X
Bluetooth version	4.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Soundbar power consumption	100 W
Power consumption (standby)	0.5 W
Power consumption (typical)	11 W
Package depth	428 mm
Package width	615 mm
Package height	178 mm
Package weight	7900 g
Cables included	AC, HDMI
Number of products included	1 pc(s)

Weight and Dimensions

Depth	338 mm
Width	550 mm
Height	93 mm
Soundbar weight	5800 g