Q CELLS Q.PEAK DUO ML-G9 Series - Electrical Connections and Safety; 4.1 Safety; Electric Shock and Fire Risk

18 19INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO ML-G9.X – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO ML-G9.X – Q CELLS18
Ä Ensure that all necessary safety and functional
tests have been carried out according to
applicable standards.
Note! Module damage may occur!
Ä Ensure that the plug connections are secured
away from any water-channelling surface.
Ä Integrate the system into the existing lightening
protection system in accordance with the
applicable local regulations.
Warning! Fire Risk!
Ä Do not use light concentrators (e.g. mirrors or
lenses).
Ä Ensure that the cabling is not exposed and/or
hanging and is protected from dirt, moisture
and mechanical friction.
4 ELECTRICAL CONNECTION
4.4 AFTER INSTALLATION
Ä No dry cleaning or use of rotating brushes.
Ä Modules must be cleaned manually and only
with sufficient water.
Protective Grounding
Ä The modules must be grounded in accordance with the local
statutory regulations.
DANGER!
Risk of fatal injury due to electric shock!
Ä Do not attempt to fix any problems yourself (e.g., glass cracks,
damaged cables).
Ä Please contact an installer or Q CELLS Technical Customer
Service Department.
Ä Do not disconnect modules by yourself.
Ä Please contact an installer or Q CELLS Technical Customer
Service Department.
Ä Dispose of modules in accordance with the local disposal
regulations.
5 GROUNDING 6 FAULTS AND DEFECTS
7 DISPOSAL