WWW.Q-CONNECT.COM
3
PROBLEM 3 – THE SHREDDER HAS JAMMED WHILST SHRED-
DING
Empty the waste bin and try reversing the unit to clear the jam.
If this does not work disconnect power, trim o paper above and
below the jam, reconnect power and try alternating between re-
verse and auto until the jam clears.
If at any point the shredder stops working during this process it has
probably over heated and will need to cool down for 60 minutes.
Please be careful not to exceed the maximum paper capacity and
feed the paper in straight, please be aware damage caused to the
shredder by inserting too much paper or by failing to shred using
a straight paper path is classed as misuse and invalidates your war-
ranty. Never attempt to clear paper jams by inserting implements
into the shredder or by opening the unit.
t
To Next Page
Loading...
Need help?
General
