Need help?Do you have a question about the Q-Lab Q-SUN Xe-3 Series and is the answer not in the manual?
General| Light Source | Xenon arc lamp |
|---|---|
| Spectral Range | UV, Visible, and IR |
| Temperature Control | Yes |
| Humidity Control | Yes |
| Spray | Optional |
| Lamp | 1800 W Xenon arc lamp |
| Display | Touchscreen |
Details on operating conditions, installation category, and pollution control.
Visual representations of hazards and waste disposal regulations.
Details on warning labels indicating heat and electrical shock dangers.
Information on risks associated with UV and IR light from the lamps.
Safety considerations for the dual spray system, including fluid hazards.
Details on different Q-SUN Xe-3 models and their configurations.
List of standards that can be performed with the Q-SUN Xe-3 testers.
Recommended ambient temperature, humidity, and physical location for operation.
Environments to avoid, including contamination and temperature extremes.
Additional environments that should be avoided for safe operation.
Step-by-step instructions for safely removing the Xe-3 tester from its shipping crate.
Procedures for uncrating the optional chiller unit.
Instructions for assembling the chiller unit to the Xe-3 tester.
Guide for installing the exhaust vent system on the Xe-3 tester.
Instructions for positioning the Back Spray manifold into its operational location.
Steps for uncrating and assembling the Dual Spray system.
Recommended clearances and physical dimensions for Xe-3 placement.
Details on electrical specifications, connections, and power requirements.
Specifications for purified water supply and RO/DI system requirements.
Information on air intake, exhaust vents, and room ventilation needs.
Guidance on placing specimens onto the test chamber tray.
Overview of the control panel, switches, and touch screen displays for "E" models.
Details on the control panel, keypad, and displays for the Xe-3-H model.
Instructions on how the chiller operates with the Q-SUN Xe-3 during test programs.
How to operate the dual spray system during specific test steps.
To Next Page
