Do not attempt to disassemble the camera.
A. PRECAUTIONS：
B. FEATURES：
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
This symbol alerts the user to the presence of important operating and
IR Waterproof Digital Color CCD
Camera
This equipment has been tested and found to comply with the limits for a
（
（（
（
a
）
））
）
Do not attempt to disassemble the camera.
To prevent electric shock,do not remove screws or covers.
There are no user serviceable parts inside.Ask a qualified service
person for servicing
（
（（
（
b
）
））
）
Handle the camera with care.
Do not abuse the camera.Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（
c
）
））
）
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove,use a mild detergent and wipe
gently.
（
（（
（
d
）
））
）
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（
e
）
））
）
Do not aim strong light directly into the camera, otherwise it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
Has a high-resolution 1/3" CCD image sensor with high image resolution of
480TVL
；
Automatic white balance function enables the camera to produce correct and
The shell uses high-quality aluminum material (High rigidity).
；
The surface uses a high preservative adhesive (Acid resisting)
；
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
；
B. FEATURES：
All seams are air tight (Suitable for outdoors and wet weather)
；
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
MONITOR
IR Waterproof Digital Color CCD
Camera
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device,pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and,if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Warning-
Caution
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
（
（（
（
a
）
））
）
Do not attempt to disassemble the camera.
To prevent electric shock,do not remove screws or covers.
There are no user serviceable parts inside.Ask a qualified service
person for servicing
（
（（
（
b
）
））
）
Handle the camera with care.
Do not abuse the camera.Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（
c
）
））
）
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove,use a mild detergent and wipe
gently.
（
（（
（
d
）
））
）
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（
e
）
））
）
Do not aim strong light directly into the camera, otherwise it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
Has a high-resolution 1/3" CCD image sensor with high image resolution of
480TVL
；
Automatic white balance function enables the camera to produce correct and
nature colors in any light conditions, indoor or outdoor, by automatically
adjusting the white balance point.
The shell uses high-quality aluminum material (High rigidity).
；
The surface uses a high preservative adhesive (Acid resisting)
；
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
；
B. FEATURES：
The illumination distance referred to in this manual is indoor night view
distance. The infrared transmission will be affected if there is high humidity or
smoke in the air. Naturally the viewable distance will be shortened and the
night view effection will be reduced when the objects are lawn, trees or
anything without reflecting ability.
All seams are air tight (Suitable for outdoors and wet weather)
；
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
MONITOR
电源
E. Specification：
IR Waterproof Digital Color CCD
Camera
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device,pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and,if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Warning-
Caution
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
（
（（
（
a
）
））
）
Do not attempt to disassemble the camera.
To prevent electric shock,do not remove screws or covers.
There are no user serviceable parts inside.Ask a qualified service
person for servicing
（
（（
（
b
）
））
）
Handle the camera with care.
Do not abuse the camera.Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（
c
）
））
）
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove,use a mild detergent and wipe
gently.
（
（（
（
d
）
））
）
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（
e
）
））
）
Do not aim strong light directly into the camera, otherwise it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
Has a high-resolution 1/3" CCD image sensor with high image resolution of
480TVL
；
Automatic white balance function enables the camera to produce correct and
nature colors in any light conditions, indoor or outdoor, by automatically
adjusting the white balance point.
The shell uses high-quality aluminum material (High rigidity).
；
The surface uses a high preservative adhesive (Acid resisting)
；
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
；
B. FEATURES：
The illumination distance referred to in this manual is indoor night view
distance. The infrared transmission will be affected if there is high humidity or
smoke in the air. Naturally the viewable distance will be shortened and the
night view effection will be reduced when the objects are lawn, trees or
anything without reflecting ability.
（
a
）
One monitor system with one camera
：
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION：
1/3"SONY CCD
NTSC:768(H) 494(V)
480TVL
Internal
Interlace 2:1
Scanning system
Sync System
Image Sensor
Pixel
Horizontal Resolution
D. SPECIFICATIONS：
All seams are air tight (Suitable for outdoors and wet weather)
；
www.q-see.com
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
MONITOR
电源
监视器
电源
E. Specification：
IR Waterproof Digital Color CCD
Camera
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device,pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and,if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Warning-
Caution
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
（
（（
（
a
）
））
）
Do not attempt to disassemble the camera.
To prevent electric shock,do not remove screws or covers.
There are no user serviceable parts inside.Ask a qualified service
person for servicing
（
（（
（
b
）
））
）
Handle the camera with care.
Do not abuse the camera.Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（
c
）
））
）
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove,use a mild detergent and wipe
gently.
（
（（
（
d
）
））
）
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（
e
）
））
）
Do not aim strong light directly into the camera, otherwise it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
Has a high-resolution 1/3" CCD image sensor with high image resolution of
480TVL
；
Automatic white balance function enables the camera to produce correct and
nature colors in any light conditions, indoor or outdoor, by automatically
adjusting the white balance point.
The shell uses high-quality aluminum material (High rigidity).
；
The surface uses a high preservative adhesive (Acid resisting)
；
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
；
B. FEATURES：
The illumination distance referred to in this manual is indoor night view
distance. The infrared transmission will be affected if there is high humidity or
smoke in the air. Naturally the viewable distance will be shortened and the
night view effection will be reduced when the objects are lawn, trees or
anything without reflecting ability.
（
b
）
One monitor system with two or more cameras
：
（
a
）
One monitor system with one camera
：
Video monitor
AC ADAPTER
CAMERA
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION：
1/3"SONY CCD
NTSC:768(H) 494(V)
480TVL
Internal
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
0.45
1.0Vp-p 75Ω BNC
0.5Lux/0Lux(When IR LEDs on)F2.0
IP65
850nM
Day/Night
φ5 LED 36pcs
On/Off
On/Off
≥52dB
Scanning system
Sync System
Electronic Shutter
White Balance
Image Sensor
Pixel
Horizontal Resolution
IR LEDs Wavelength
waterproof level
IR LEDs Distance
IR LEDs Amount
S/N Ratio
Gamma
Video Output
Usable Illumination
AGC
IR LEDs Auto ON/OFF
BLC
D. SPECIFICATIONS：
All seams are air tight (Suitable for outdoors and wet weather)
；
www.q-see.com
24m (80ft)
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
MONITOR
Design and specification are subject
to change without prior notice.
Printed in Jul.,2008
电源
监视器
电源
E. Specification：
IR Waterproof Digital Color CCD
Camera
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device,pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and,if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Warning-
Caution
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
（
（（
（
a
）
））
）
Do not attempt to disassemble the camera.
To prevent electric shock,do not remove screws or covers.
There are no user serviceable parts inside.Ask a qualified service
person for servicing
（
（（
（
b
）
））
）
Handle the camera with care.
Do not abuse the camera.Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（
c
）
））
）
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove,use a mild detergent and wipe
gently.
（
（（
（
d
）
））
）
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（
e
）
））
）
Do not aim strong light directly into the camera, otherwise it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
Has a high-resolution 1/3" CCD image sensor with high image resolution of
480TVL
；
Automatic white balance function enables the camera to produce correct and
nature colors in any light conditions, indoor or outdoor, by automatically
adjusting the white balance point.
The shell uses high-quality aluminum material (High rigidity).
；
The surface uses a high preservative adhesive (Acid resisting)
；
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
；
B. FEATURES：
The illumination distance referred to in this manual is indoor night view
distance. The infrared transmission will be affected if there is high humidity or
smoke in the air. Naturally the viewable distance will be shortened and the
night view effection will be reduced when the objects are lawn, trees or
anything without reflecting ability.
（
b
）
One monitor system with two or more cameras
：
（
a
）
One monitor system with one camera
：
Video monitor
AC ADAPTER
CAMERA
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION：
1/3"SONY CCD
NTSC:768(H) 494(V)
480TVL
Internal
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
0.45
1.0Vp-p 75Ω BNC
0.5Lux/0Lux(When IR LEDs on)F2.0
IP65
850nM
30m
Day/Night
φ5 LED 36pcs
On/Off
On/Off
6mm
DC12V 1.5A
5W(When IR LEDs on)
580g (20.5oz)
-10
～
+50
(14 F to 122 F) RH 95% Max
≥52dB
Scanning system
Sync System
Electronic Shutter
White Balance
Image Sensor
Pixel
Horizontal Resolution
IR LEDs Wavelength
waterproof level
IR LEDs Distance
IR LEDs Amount
S/N Ratio
Gamma
Video Output
Usable Illumination
Power Supply
Lens
Power Consumption
Operating Temperature
AGC
IR LEDs Auto ON/OFF
BLC
Weight
D. SPECIFICATIONS：
All seams are air tight (Suitable for outdoors and wet weather)
；
www.q-see.com
24m (80ft)
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
MONITOR
Design and specification are subject
to change without prior notice.
Printed in Jul.,2008
电源
监视器
电源
E. Specification：
IR Waterproof Digital Color CCD
Camera
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device,pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and,if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Warning-
Caution
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
（
（（
（
a
）
））
）
Do not attempt to disassemble the camera.
To prevent electric shock,do not remove screws or covers.
There are no user serviceable parts inside.Ask a qualified service
person for servicing
（
（（
（
b
）
））
）
Handle the camera with care.
Do not abuse the camera.Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（
c
）
））
）
Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove,use a mild detergent and wipe
gently.
（
（（
（
d
）
））
）
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（
e
）
））
）
Do not aim strong light directly into the camera, otherwise it will prevent
the camera from producting effective video.
A. PRECAUTIONS：
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
Has a high-resolution 1/3" CCD image sensor with high image resolution of
480TVL
；
Automatic white balance function enables the camera to produce correct and
nature colors in any light conditions, indoor or outdoor, by automatically
adjusting the white balance point.
The shell uses high-quality aluminum material (High rigidity).
；
The surface uses a high preservative adhesive (Acid resisting)
；
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
；
B. FEATURES：
The illumination distance referred to in this manual is indoor night view
distance. The infrared transmission will be affected if there is high humidity or
smoke in the air. Naturally the viewable distance will be shortened and the
night view effection will be reduced when the objects are lawn, trees or
anything without reflecting ability.
（
b
）
One monitor system with two or more cameras
：
（
a
）
One monitor system with one camera
：
Video monitor
AC ADAPTER
CAMERA
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION：
1/3"SONY CCD
NTSC:768(H) 494(V)
480TVL
Internal
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
0.45
1.0Vp-p 75Ω BNC
0.5Lux/0Lux(When IR LEDs on)F2.0
IP65
850nM
30m
Day/Night
φ5 LED 36pcs
On/Off
On/Off
6mm
DC12V 1.5A
5W(When IR LEDs on)
580g (20.5oz)
-10
～
+50
(14 F to 122 F) RH 95% Max
≥52dB
Scanning system
Sync System
Electronic Shutter
White Balance
Image Sensor
Pixel
Horizontal Resolution
IR LEDs Wavelength
waterproof level
IR LEDs Distance
IR LEDs Amount
S/N Ratio
Gamma
Video Output
Usable Illumination
Power Supply
Lens
Power Consumption
Operating Temperature
AGC
IR LEDs Auto ON/OFF
BLC
Weight
D. SPECIFICATIONS：
All seams are air tight (Suitable for outdoors and wet weather)
；
www.q-see.com
24m (80ft)
WARNING
To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
PERSONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
Need help?
General
