Q-Stoves Q 05 - User Manual

To Next Page

ASSEMBLY INSTRUCTIONS

OUTDOOR WOOD PELLET HEATER

Model: Q 05

1. Assembly

Note: Partial assembly has been done for you. The assembly of this heater requires basic

mechanical skills. Proper assembly is the responsibility of the purchaser. All service and

repairs should be done by a qualified person.

Tools required for assembly are:

Phillips Screwdriver

pliers

1.1 Unpacking

Carefully remove the all parts from the box. The paint on the stove is not fully cured until

after you fire the unit on its initial firing, so use care when handling painted parts and put

them onto soft surface.

Find and identify the following parts:

Other manuals for Q-Stoves Q 05

Need help?

Do you have a question about the Q-Stoves Q 05 and is the answer not in the manual?

Carefully remove all parts from the box. Handle painted parts with care as paint is not fully cured until after initial firing.

Inspect contents for shipping damage or missing pieces or hardware.

Lean the heater base back or lay it on its front to thread the feet into the bottom.

General