5
Multi-point Connection
First, power on the headset and connect it to Device A, then turn off Device’s A
Bluetooth. Next, connect the headset to Device B and proceed with turning on Device’s A
Bluetooth. On Device A, tap QCY Crossky Link to finish the multi-point connection.
Wearing Method
Put on the headset properly, then adjust it to fit yourself. Set the microphone toward
your mouth. Wearing the headset the wrong way may result in bad calling or listening
experience.
Charging
The LED indicator will glow solid red when the headset is being charged and turn solid
white when it is fully charged.
To Next Page
Loading...
