QCY HT03 User Manual

5
How to Connect
Open lid and pick up earbuds to power them on. On phone, search for QCY-HT03 and
tap to connect. Power on earbuds and they will auto reconnect to the last phone in
connectivity records, if any.
Open Press to Turn Connectable
1. Earbuds have been connected to phone.
2. Push earbuds into case, open case and keep pressing button on case for 3s or
until LED blinks green 5 times. Pick up earbuds again to turn them connectable.
Factory Setting
Push earbuds into case, open lid and keep pressing button on case for 10s or until LED
blinks red 5 times to reset and power on earbud.
LED for Battery Level
(Press the Butoon)
Battery level>50%: green
Battery level<50%: red

QCY HT03 Specifications

General

Bluetooth Version	5.1
Charging Time	2 hours
Water Resistance	IPX5
Type	In-ear
Connectivity	Wireless
Driver Diameter	10 mm
Frequency Response	20 Hz - 20 kHz
Microphone	Yes
Wireless Range	10 meters
Noise Cancellation	Active Noise Cancellation (ANC)