QCY HT03 User Manual

7
Power-on: open lid, or keep touching panels for 1.5s if earbuds are out of
case
Power-off: Push earbuds into case and close lid (HALL SWITCH)
Answer/end call: double touch panel
Ignore call: keep touching panel for 1.5s
Skip track forward: triple touch right panel
Voice assistant: triple touch left panel
Playback/pause: double touch left/right panel to play/pause
Low-latency mode: keep touching left panel for 1.5s
Mode switch: keep touching right panel for 1.5s to switch among ANC,
normal and transparency mode.
Tips
1. Before using the earbuds, please read the manual carefully and keep it for future
references.
2. The earbuds need to be fully charged prior to first-time use.
3. If the earbuds is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the earbuds cannot be found by your phone, please check whether they are in
pairing mode, if left unconnected for a long while, the earbuds will exit pairing
mode, please re-enter the mode, if procedure error of your phone occurs, reboot
it, if a procedure error of the earbuds occurs, reboot or reset it.
Caveats
1. Never dissemble or modify your headset for any reasons to avoid any damage
and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator closet to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and
increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
Note: please do not use earbuds for a long time as may damage your hearing.

QCY HT03 Specifications

General

Bluetooth Version	5.1
Charging Time	2 hours
Water Resistance	IPX5
Type	In-ear
Connectivity	Wireless
Driver Diameter	10 mm
Frequency Response	20 Hz - 20 kHz
Microphone	Yes
Wireless Range	10 meters
Noise Cancellation	Active Noise Cancellation (ANC)