18 – 12|2017 – Subject to change. Speedkid2 2018
The axle nut must be tightened in order to assure sufficient clamping force. Therefore,
observe the assembly instructions for the hub and the manufacturer’s torque
specifications when tightening the axle nut.
Due to the construction of the coupler, slight wear and tear in the form of scratches can
occur at the connection between bicycle frame and coupler. This is not a reason for a
complaint.
Do not use a washer or similar at the connection between the bicycle frame and coupler
because this could negatively affect the stability of the connection.
The provided universal coupler is suitable for mounting on the most rear-wheel models.
If it does not fit your bicycle, find a suitable adapter and special couplers in our manuals
on the following website: www.qeridoo.de/kupplungsleitfaden
Do not use a tool which was previously in contact with conventional steel.
Smallest steel particles could be transferred that could lead to contact corrosion..
In trailer mode, a certified rear light must be used during poor visibility or darkness in accordance
with the Road Traffic Licensing Requirements.
f Fold the push handle to the highest position.
f Mount the rear light above the left pipe clamp of the
pushing handle.
Follow the attached manufacturer's information for the work of the rear light.
To Next Page
Loading...
Need help?
General
