What to do if my QFX Clock Radio has no sound?
If your QFX Clock Radio isn't producing any sound, first, ensure the clock is set to the correct function (FM, AM) using the FUNCTION button. Also, check the volume level and increase it if it's set too low.
Why didn't my QFX CR-30 alarm sound?
If the alarm on your QFX Clock Radio didn't sound, it might be due to a couple of reasons. First, verify that the alarm is properly turned ON by checking the LED Display Lights. Second, ensure that the alarm time is set correctly, paying attention to AM/PM.
General| Tuner Technology | Digital |
|---|---|
| Display Type | LED |
| Snooze Function | Yes |
| Sleep Timer | Yes |
| Backup Battery | Yes |
| Brand | QFX |
| Model | CR-30 |
| Type | Clock Radio |
| Radio Band | AM/FM |
| Band | FM |
| Power Source | AC |
| Alarm Type | Buzzer |
Crucial safety advice on appliance usage, including fire, shock, laser, and liquid exposure risks.
Key operational safety guidelines covering installation, cleaning, ventilation, and electrical plug usage.
Identifies all buttons, the LED display, and other physical controls on the clock radio.
Defines the meaning of each indicator light (A-E) shown on the clock radio's LED display.
Step-by-step instructions for setting the correct current time on the clock display.
Guide to configuring the first alarm, including selecting buzzer or radio and setting time.
Guide to configuring the second alarm, including selecting buzzer or radio and setting time.
Instructions for managing alarm sounds using the snooze button and how to stop alarms.
How to switch between modes using the FUNCTION button and adjust audio volume.
Steps for tuning FM/AM radio stations, using sweep, and improving reception.
Instructions for saving and recalling favorite radio stations using preset memory.
How to set the sleep timer for automatic music shut-off after a chosen duration.
Procedure for installing backup batteries to maintain clock and alarm settings during power failures.
Common issues and their solutions, such as alarm not sounding or no audio output.
To Next Page
