*Please Don’t install with electricity
Function description and setting
method
* Note: All the following working modes need to be implemented with QIACHIP remote
control (transmitter) and controller (receiver / wireless remote control switch). There is
no guarantee that remote controls from other brands will work properly with our
product.
Reset function:
Clear all matched remotes. When the data is cleared, all remote control can't make receiver
work.
Settings reset:
After pressing the receiver's learning button 8 times, the receiver clears all remote control data
in its memory. When the receiver's <LED 2> flashes, the reset function is complete.
Description of the three working modes :
Working modes: 1) Momentary; 2) Toggle; 3) Latching.
To Next Page
Loading...