Qilive Q.5893 User Manual (English)

Questions and Answers:

J
Judith HuangAug 8, 2025
What to do if my Qilive Q.5893 Coffee Maker does not turn on?
- L
  Lucas ButlerAug 8, 2025
  First, ensure the appliance is plugged into the wall socket and the plug is firmly inserted. Check the power source to make sure there is electricity. If the appliance is overheating, turn the Steam Control knob to “OFF” and unplug it from the wall socket. Let the appliance cool down for at least 10 minutes, then plug it in and try again. If the problem persists, it may indicate a malfunction.
A
acareyAug 13, 2025
Why does water leak from the bottom of my Qilive Q.5893 Coffee Maker?
- D
  Duane GarciaAug 13, 2025
  Water may leak from the bottom of your Qilive Coffee Maker if the drip tray is full. Empty and clean the drip tray regularly. If the drip tray isn't full, it could indicate a malfunction.
K
Kevin ReynoldsAug 18, 2025
Why does my coffee tastes sour from Qilive Q.5893 Coffee Maker?
- J
  Jennifer PatelAug 18, 2025
  A sour taste in your coffee from the Qilive Coffee Maker can be due to several reasons. Ensure you performed the first flush and steam operation before the first use, following the instructions in BEFORE FIRST USE. Check if the coffee grounds are expired or have been stored improperly; use fresh coffee grounds and store them in a cool, dry place, resealing tightly or refrigerating after opening. The espresso machine may also need descaling.
S
Shelia TorresAug 23, 2025
What to do if water leaks from the sides of the filter of Qilive Coffee Maker?
- M
  millerkarinaAug 23, 2025
  If water leaks from the sides of the filter of your Qilive Coffee Maker, it could be due to a few reasons. First, remove any loose coffee grounds around the rim of the filter before inserting the portafilter onto the brew head. Also, ensure that you are not overfilling the filter; fill coffee grounds evenly and level with the rim, and then tamp them. Finally, make sure the portafilter is properly locked into the brew head in the “INSERT” position, and then turn the handle to the right until it reaches the “LOCKED” position.
M
Michael ZamoraAug 28, 2025
How to fix a Qilive Coffee Maker steam wand that does not produce froth?
- R
  Rachel PhillipsAug 28, 2025
  If the steam wand on your Qilive Coffee Maker isn't producing froth, ensure the Steam button was pressed and has stopped blinking, and that the Steam Control knob is not in the off position; turn the Steam Control knob anti-clockwise to increase the steam. Also, make sure you're using a frothing jug that is slim and tall enough, with a diameter of at least 7 cm, and not too large or too small for the amount of milk. Finally, avoid using skimmed milk; use whole milk or semi-skimmed milk instead.
T
Tom DuncanSep 2, 2025
Why is there rust on the metal parts of my Qilive Coffee Maker?
- T
  Todd OconnellSep 2, 2025
  Rust on the metal parts of your Qilive Coffee Maker may be due to using a descaler that was not suitable for espresso machines or was too strong, causing corrosion. Use a commercially available descaler specifically designed for espresso machines.