What to do if my Qilive Q.6152 does not start?
If your Qilive Dryer isn't starting, make sure the power is on and the plug is firmly in the socket. Ensure the door is properly closed, the desired program is selected, and then press the Start/Pause button.
Why is my Qilive Q.6152 not drying properly or taking too long?
If your Qilive Dryer isn't drying clothes properly or the drying time is too long, try these steps: First, clean the lint filter and heat exchanger, and empty the water container. Also, check the drain hose. Then, make sure the installation location is appropriate and the air inlet is clean. Finally, try using a higher drying intensity level program or a timed program.
What to do if the indicator light is on in my Qilive Dryer?
If the indicator light is on in your Qilive Dryer, it means the water container needs to be emptied. If the container isn't full, try restarting the dryer. If the light remains on after these steps, please call the service center.
How to fix a Qilive Dryer when the display is not on?
If the display on your Qilive Dryer isn't working, check the power supply and ensure the mains plug is properly inserted. Also, verify the selected program and press the On/Off button.
Why is my Qilive Dryer making humming noises?
The humming noises from your Qilive Dryer are normal. It simply means the compressor is operating and does not indicate any fault.
Why does my Qilive Dryer switch off at the end of the program?
Your Qilive Dryer switches off automatically at the end of the program to save energy. This is normal and not an error.
What to do if the light is on in my Qilive Dryer?
If the light is illuminated on your Qilive Dryer, empty the water container. If the container wasn't full, try restarting the dryer.
How to fix a Qilive Q.6152 with a display that is not on?
If the display of your Qilive dryer is not on, check the power supply, ensure the mains plug is correctly inserted, verify the selected program, and press the On/Off button.
Why does my Qilive Q.6152 Dryer switch off automatically?
Your Qilive Dryer switches off automatically at the end of the program to save energy. This is a normal function, not an error.
What does error E32 mean on my Qilive Dryer?
Error code E32 on your Qilive Dryer indicates a humidity sensor error. If the problem persists, contact your local service centre.
To Next Page
General
