1212
ESEN
■ Let hot foods cool to room temperature before placing in the refrigerator. Overloading the
refrigerator forces the compressor to run longer. Foods that freeze too slowly may lose quality,
or spoil.
■ Wrap foods properly, and wipe containers dry before placing them in the refrigerator. This cuts
down on frost build-up inside the refrigerator.
■ Do not line the refrigerator’s storage bin with aluminium foil, wax paper, or paper towelling.
Liners interfere with cold air circulation, making the refrigerator less efficient.
■ Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time. Close the door as soon as possible.
5.8 Error message display
If one of the following error codes appears on the display, contact the after-sales service for
maintenance to ensure optimal operation of the refrigerator.
Error code Error description
E1 Temperature sensor failure of refrigerating chamber
E2 Temperature sensor failure of freezing chamber
E5 Freezing defrost sensor detection circuit error
E6 Communication error
E7 Ambient temperature
6. CLEANING AND MAINTENANCE
Warning! Always disconnect the power plug from the
wall outlet before cleaning.
Warning! Do not use any corrosive detergent, wire
brush, abrasive cleaner, sharp object or metal to clean
the appliance.
Parts Cleaning
Inserts and interior
surfaces
■ Remove all the shelves and the containers.
■ Wash the parts in lukewarm water with a mild, odourless detergent
(e.g. dishwashing liquid).
■ Rinse with water and dry thoroughly.
Housing ■ Wipe off regularly with a soft cloth and mild detergent.
■ The dust behind the refrigerator and on the oor must be cleaned
in a timely manner to maintain the cooling capability and energy
saving.
6.1 Defrosting
The refrigerator is made based on the air-cooling principle and thus has automatic defrosting
function. Frost formed due to change of season or temperature may also be manually removed by
disconnection of the refrigerator from power supply or by wiping with a dry towel.