Hinge cover
3x screw
Hinge
6. On the top left of the appliance, remove the four hole covers then screw the top hinge
into the holes.
7. Place the door back into the top hinge pin.
8. Fix the door stop onto the bottom left of the appliance using the screw.
9. Secure the door on the bottom left using the two screws.
10. Replace the foot on the bottom right of the appliance.
11. Stand the appliance in a vertical position. Plug the appliance to the wall outlet.
Climate Range
Inall this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance. This ensures the correct
operation of the appliance.
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Locks
If the refrigerator is tted with a lock, keep the key out of reach and not in the vicinity
of the appliance to prevent children being entrapped. Before the disposal of an old
refrigerator, break o its lock or latches as a safeguard.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domeic power supply. The appliance mu be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domeic power
supply socket is not earthed, connect the appliance to a separate earth in compliance
with current regulations, consulting a qualied electrician.
The manufacturer declines all responsibility if the above safety precautions are not
observed.
1010
To Next Page
Loading...
Need help?
General
