Note: If the appliance is not level, the door and the door seal
will not be closed properly.
Reverse door
Ensure the appliance is unplugged and empty. To take the door o, it is necessary to tilt
the appliance backwards. You should re the appliance on something solid so that it will
not slip during the door reversing process. All parts removed mu be saved to do the
reinallation of the door. Do not lay the appliance at as this may damage the coolant
syem. It is better that 2 people handle the appliance during assembly.
1. Unscrew and remove the door bracket on the bottom right of the appliance.
2x screw
2. Unscrew and remove the door stop on the bottom right of the appliance.
1x screw
3. Unscrew and remove the foot on the bottom left of the appliance.
4. Remove the door of the appliance, and place it on a soft pad to avoid scratches.
5. On the top right of the appliance, remove the hinge cover and three screws then
remove the top hinge.
99
To Next Page
Loading...
Need help?
General
