Qilive Q.6621 - Levelling Feet Adjustment; Door Handle Installation

11
EN
4.2. LEVELLING FEET
Schematic diagram of the levelling feet:
Lower
Higher
Note: The picture above is for reference only. The actual configuration will depend on
the physical product or statement by the distributor.
Adjustment procedures:
1. Turn the feet clockwise to raise the refrigerator;
2. Turn the feet counter-clockwise to lower the refrigerator;
3. Adjust the right and left feet based on the above procedures to a horizontal level.
4.3. INSTALL THE DOOR HANDLE
• Precautions shall be taken to prevent fall of the handle from causing any personal
injury.
Tools required:
Cross-head screwdriver
Thin-blade screwdriver
Note: The above tools are not supplied.
Assembly steps:
1. Power off this appliance before conducting this operation. Remove all food from
door shelves. Use a thin-blade screwdriver to remove the screw hole caps from
the door, and use a cross-head screwdriver to fix screws into the screw hole
tightly.
2. Assemble the screw hole cap on the screw hole of handle.
The reverse operation is for disassembly.