7
Disposal of the appliance
1. Disconnect the mains plug from the mains socket.
2. Cut o the mains cable and discard it.
WARNING! During using, service and disposal the appliance, please pay attention to
symbol similar as left side, which is located on rear of appliance (rear panel or
compressor) and with yellow or orange color.
It’s risk of re warning symbol.
There are ammable materials in refrigerant pipes and compressor.
Please be far away re source during using, service and disposal.
Refrigerant and cyclopentane foaming material used for the appliance are ammable.
Therefore, when the appliance is scrapped, it shall be kept away from any re source and be
recovered by a special recovering company with corresponding qualication other than be
disposed by combustion, so as to prevent damage to the environment or any other harm.
2. TECHNICAL SPECIFICATIONS
Power supply: 220 - 240 V~, 50 Hz
Rated current: 0.7 A
Total input power: 100 W
Annual energy consumption: 156 kWh/year
Protection class: Class I
Climate class: N/ST
Total storage volume: 60 L
Freezer compartment: 60 L
Refrigerant and inject amount: R600a/36g
3. PRODUCT DESCRIPTION
1. Thermostat
2. Freezer Drawers
3. Leveling Feet
4. REVERSE DOOR
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
■ Ensure the unit is unplugged and empty.
■ To take the door o, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
■ All parts removed must be saved to do the reinstallation of the door.
■ Do not lay the unit at as this may damage the cooling system.
■ It’s better that 2 people handle the unit during assembly.
■ This refrigerating appliance is not intended to be used as a built-in appliance.
1. Remove the top right cover.
To Next Page
Loading...
